United B38M at Newark on Feb 6th 2024, stuck rudder pedals on landing
Last Update: March 7, 2024 / 20:44:03 GMT/Zulu time
Incident Facts
Date of incident
Feb 6, 2024
Classification
Incident
Airline
United
Flight number
UA-1539
Departure
Nassau, Bahamas
Destination
Newark, United States
Aircraft Registration
N47280
Aircraft Type
Boeing 737-800MAX
ICAO Type Designator
B38M
The aircraft underwent a test flight the following day during which the anomaly was replicated.
On Mar 7th 2024 the NTSB reported:
In a post-incident statement, the captain reported that during the landing rollout, the rudder pedals did not move in response to the “normal” application of foot pressure while attempting to maintain the runway centerline. The pedals remained “stuck” in their neutral position. The captain used the nosewheel steering tiller to keep the airplane near the runway centerline while slowing to a safe taxi speed before exiting the runway onto a high-speed turn-off. While on the high-speed turnoff, the captain asked the first officer to check his rudder pedals and he reported the same problem. The captain reported, that shortly thereafter, the rudder pedals began to operate normally. After parking the aircraft, the flight crew notified UAL maintenance of the flight control malfunction. The airplane was removed from service for maintenance and troubleshooting.
A review of preliminary flight data recorder (FDR) data corroborated the pilot’s statements regarding the malfunction of the rudder system. Data showed that during the landing and subsequent rollout, the rudder surface position remained near its neutral position even though the force inputs to the rudder pedals were observed to be increasing. About 30 seconds after touchdown, a significant pedal force input was observed along with corresponding rudder surface movement. Afterward, the rudder pedals and rudder surface began moving as commanded and continued to function normally for the remainder of the taxi.
On February 9, 2024, UAL conducted a test flight on the event airplane at EWR and was able to duplicate the reported rudder system malfunction identified during the incident. As a result, the test flight profile was discontinued, and the airplane returned to EWR and landed uneventfully.
The NTSB was notified of the flight control issue after the flight test and an incident investigation was started.
The NTSB further reported:
Post-incident troubleshooting and inspection of the rudder control system found no obvious malfunctions with the system or any of its components whose failure would have resulted in the restricted movement observed during flight 1539 and the test flight. As a precaution, the aft rudder input torque tube and associated upper and lower bearings and the rudder rollout guidance servo were removed for further examination by the NTSB systems group.
...
On February 28, 2024, the Systems group met at the Collins Aerospace facility in Cedar Rapids, Iowa to examine and test the SVO-730 rollout guidance servo removed from the incident airplane. The testing was conducted to evaluate the effects that temperature “cold soaking” of the servo might have on the torque required to move the servo’s output crank arm. Testing at room temperature found that the torque to rotate the servo’s output crank arm was within design specifications. The unit was then “cold soaked” for 1 hour and the test was repeated. That testing found that the torque to move the servo’s output crank arm was significantly beyond the specified design limits. Because the servo output crank arm is mechanically connected to the rudder input torque tube, the restricted movement of the servo’s output crank arm would prevent the rudder pedals from moving as observed during flight 1539 and the test flight. Further examination of the SVO-730 rollout guidance servo will be conducted as the investigation continues.
Aircraft Registration Data
Incident Facts
Date of incident
Feb 6, 2024
Classification
Incident
Airline
United
Flight number
UA-1539
Departure
Nassau, Bahamas
Destination
Newark, United States
Aircraft Registration
N47280
Aircraft Type
Boeing 737-800MAX
ICAO Type Designator
B38M
This article is published under license from Avherald.com. © of text by Avherald.com.
Article source
You can read 2 more free articles without a subscription.
Subscribe now and continue reading without any limits!
Read unlimited articles and receive our daily update briefing. Gain better insights into what is happening in commercial aviation safety.
Send tip
Support AeroInside by sending a small tip amount.
Related articles
United B738 at Fukuoka on May 10th 2024, flaps problem
A United Boeing 737-800, registration N39297 performing flight UA-166 from Fukuoka (Japan) to Guam (Guam) with 50 people on board, was climbing out…
United B763 over Atlantic on Mar 28th 2022, engine failure
A United Boeing 767-300, registration N675UA performing flight UA-134 from Newark,NJ (USA) to Zurich (Switzerland) with 123 people on board, was…
United B739 at Austin on May 5th 2024, flaps problem
A United Boeing 737-900, registration N39463 performing flight UA-381 from Washington Dulles,DC to Austin,TX (USA), was on final approach to Austin's…
United B39M at Orlando on Apr 26th 2024, runway incursion forces rejected takeoff
A United Boeing 737-9 MAX, registration N37540 performing flight UA-1929 from Newark,NJ to Orlando,FL (USA), had landed on Orlando's runway 18R and…
United B763 near Providence on Apr 22nd 2024, suspected fuel leak
A United Boeing 767-300, registration N644UA performing flight UA-108 from Washington Dulles,DC (USA) to Munich (Germany), was enroute at FL330 about…
Newest articles
Easyjet A320 at Manchester on May 12th 2024, lightning strike
An Easyjet Airbus A320-200, registration G-EZPD performing flight U2-2179 from Manchester,EN (UK) to Amsterdam (Netherlands), was in the initial…
Canadian North AT72 at Cambridge Bay on Apr 14th 2024, runway excursion on landing
A Canadian North Avions de Transport Regional ATR-72-200, registration C-FRQA performing flight 5T-5858 from Yellowknife,NT to Cambridge Bay,NU…
Subscribe today
Are you researching aviation incidents? Get access to AeroInside Insights, unlimited read access and receive the daily newsletter.
Pick your plan and subscribePartner
A new way to document and demonstrate airworthiness compliance and aircraft value. Find out more.
ELITE Simulation Solutions is a leading global provider of Flight Simulation Training Devices, IFR training software as well as flight controls and related services. Find out more.
Your regulation partner, specialists in aviation safety and compliance; providing training, auditing, and consultancy services. Find out more.
AeroInside Blog
Popular aircraft
Airbus A320Boeing 737-800
Boeing 737-800 MAX
Popular airlines
American AirlinesUnited
Delta
Air Canada
Lufthansa
British Airways